unsichtbares Hintergrundbild als Klickfläche

FOERSTER
welding fixtures

FÖRSTER welding fixtures increase your efficiency, increase the quality of your products and relieve your staff.

Whatever your welding tasks require, we will build the right device for you.

Highest quality, Made in Germany!

welding fixtures for railings

With maximum variability – effectively manufacture railings

Our in-house development, which has been awarded the Bavarian State Prize, enables you to manufacture railings or similar constructions in half the time.

The device is fully adaptable to the railing layout, offers access to the welds from both sides and guarantees full repeatability of the railings.

  • Railing length 3.6 m, 5 m, 7 m or 9 m
  • Railing height up to 1.2 m or up to 1.5 m
  • Incline up to 60°
  • Weights up to 300 kg
  • motorized reversing drive
  • tool-free setup
  • Ground connection on the frame

We are happy to fulfill special requests.

Up to 50 % time saving with the fixtures form FOERSTER welding systems.

programmable

for quick and variable manufacturing

with touch display

  • enter bar count and bar spacing or
  • automated calculation of bar count and bar spacing or
  • data input via PC or thumb drive
  • > 99 Programms saveable
  • pitch up to 60°
  • railing hight 600 mm – 1.200 mm

    To send us your request for quotation enter a quantity behind the corresponding article number and fill out the form.

    Railing length

    Railing hight

    Turning 360°

    Max. load

    Item number

    5000 mm

    600 mm – 1200 mm

    Electromotive

    150 kg

    300 kg

    64125012

    64225012

    7000 mm

    600 mm – 1200 mm

    600 mm – 1500 mm

    Electromotive

    150 kg

    300 kg

    150 kg

    300 kg

    64127012

    64227012

    64127015

    64227015

    9000 mm

    600 mm – 1200 mm

    600 mm – 1500 mm

    Electromotive

    300 kg

    300 kg

    64229012

    64229015

    manually adjustable

    for small series production – simple handling

    with digital counter

    • manually input grid stops
    • pitch up to 60°
    • railing hight 600 mm – 1.200 mm
    • max load up to 300 Kg
    • slide moveable per hand
    • ground connection at frame
    • 360° electromotive turn function

      To send us your request for quotation enter a quantity behind the corresponding article number and fill out the form.

      Railing length

      Railing hight

      Turning 360°

      Max. load

      Item number

      3600 mm

      600 mm – 1200 mm

      manuell

      50 kg

      64313612

      5000 mm

      600 mm – 1200 mm

      Electromotive

      150 kg

      64115012

      7000 mm

      600 mm – 1200 mm

      Electromotive

      150 kg

      300 kg

      64117012

      64217012

      9000 mm

      600 mm – 1200 mm

      Electromotive

      300 kg

      64219012

      welding fixtures for frames

      Welding in one clamping: ergonomic, precise and fast

      With a frame welding device from FÖRSTER, you can weld different sizes and designs – without measuring and positioning – exactly at right angles and semi-automatically.

      • mobile
      • rotatable 360°
      • Component weight up to 300 kg

        To send us your request for quotation enter a quantity behind the corresponding article number and fill out the form.

        Frame size

        Turn function 360°

        Max. load

        Item number

        3000 mm x 1500 mm

        manuell

        50 Kg

        64103015

        3000 mm x 1500 mm

        Electromotive

        200 Kg

        64203015

        3000 mm x 2000 mm

        Electromotive

        200 Kg

        64103020

        3000 mm x 2500 mm

        Electromotive

        200 Kg

        64103025

        4300 mm x 2000 mm

        Electromotive

        200 Kg

        64304320

        4300 mm x 2500 mm

        Electromotive

        200 Kg

        64304325

        4300 mm x 3000 mm

        Electromotive

        300 Kg

        64504330

        Digital measurement system for frame welding fixtures up to 3 m x 2 m (for Item number 64103015, 64203015, 64103020)

        – with 4 digit display, Sensor and magnetic tape
        – for longitudinal and cross moving
        – fits 3 Clamping corners

        64014401

        Digital measurement system for frame welding fixtures up to 4,4 m x 2,5 m (for Item number 64103025, 64304320, 64304325)

        – with 4 digit display, Sensor and magnetic tape
        – for longitudinal and cross moving
        – fits 3 Clamping corners

        64014402

        Standard up to 2,5 t / lifts up to 2.000 mm / 360° rotary function / custom sizes and max loads at request

        fixture for frames with lift + turn function

        Our lifting and turning device offers maximum work simplification for the all-round welding of very large or complex assemblies.

        Lifting columns with electro-hydraulic height adjustment form the basis for a comfortable and ergonomic workplace.

        We adapt the frame construction to the workpiece to be clamped. Loads of up to several tons and the picking up of very long and wide components are possible.

        By using our moveable X-Pro or double-groove profiles, the support elements and clamping elements can be individually positioned at any time.

          To send us your request for quotation enter a quantity behind the corresponding article number and fill out the form.

          Modell

          Max. load

          Lift hight

          Rotation

          Item number

          Lift-turn columns

          2,5 t +

          ca. 500 mm – 2000 mm

          360° electromotive

          64890000

          Lifting and turning device

          2,0 t +

          ca. 500 mm – 2000 mm

          360° electromotive

          64884010

          special fixtures

          custom made to fit your tasks

          For manual and robot welding

          The recurring welding of the same or structurally identical components requires the use of fixed or variable welding devices.

          A good welding device should not only position the individual parts precisely and safely, but also ensure that as many weld seams as possible can be reached in a suitable welding position without hindrance. Welding distortion that occurs should be limited by targeted prestressing or cooling, whereby the entire welding process must also be taken into account.

          High demands on exact component positioning in robotic welding devices should always have priority over corrective seam tracking systems.

          revision of a worm shaft for an oil press

          Do you have special requests, e.g. heavier loads, larger dimensions or do you need more information? No problem! Contact us here.

          Copyright ©2023 FÖRSTER welding systems. All rights reserved.


          Nous vous remercions de votre demande.
          Nous vous contacterons prochainement.


          Vielen Dank für Ihre Anfrage.
          Wir werden uns in Kürze bei Ihnen melden.

          FÖRSTER Zubehör




          Set 1 - Rahmenbau Stahl

          Set 1 - Rahmenbau Stahl


          4 St. Spannarm mit Spannelement ø 30 mm
          4 St. Spannsäule komplett, ø 30mm x 350 mm
          6 St. Flachspanner
          5 St. Kantenanschlag Höhe 70 mm in GG
          12 St. Flachanschlag (Stahl)
          6 St. Schnellspanner mit Flachanschlag
          4 St. Anschlagwinkel 100 mm x 170 mm in GG
          2 St. Universalwinkel 350 mm x 350 mm



          Set 1 - Rahmenbau Edelstahl

          Set 1 - Rahmenbau Edelstahl

          4 St. Spannarm mit Spannelement mit Bronzedruckstück
          4 St. Spannsäule komplett, ø 30 mm x 350 mm
          6 St. Flachspanner mit Edelstahlscheibe
          5 St. Kantenanschlag in Alu Höhe 70 mm
          12 St. Flachanschlag in Alu
          6 St. Schnellspanner mit Flachanschlag
          4 St. Anschlagwinkel in Alu 100 mm x 170 mm
          2 St. Universalwinkel 350 mm x 350 mm




          Set 1 - Rahmenbau Stahl

          4 St. Spannarm mit Spannelement ø 30 mm
          4 St. Spannsäule komplett, ø 30mm x 350 mm
          6 St. Flachspanner
          5 St. Kantenanschlag Höhe 70 mm in GG
          12 St. Flachanschlag (Stahl)
          6 St. Schnellspanner mit Flachanschlag
          4 St. Anschlagwinkel 100 mm x 170 mm in GG
          2 St. Universalwinkel 350 mm x 350 mm

          Set 1 - Rahmenbau Edelstahl


          4 St. Spannarm mit Spannelement mit Bronzedruckstück
          4 St. Spannsäule komplett, ø 30 mm x 350 mm
          6 St. Flachspanner mit Edelstahlscheibe
          5 St. Kantenanschlag in Alu Höhe 70 mm
          12 St. Flachanschlag in Alu
          6 St. Schnellspanner mit Flachanschlag
          4 St. Anschlagwinkel in Alu 100 mm x 170 mm
          2 St. Universalwinkel 350 mm x 350 mm



          Set 2 - Rohrbau Stahl

          Set 2 - Rohrbau Stahl
          6 St. Spannarm mit Spannelement ø 30 mm
          6 St. Spannsäule komplett, ø 30 mm x 350 mm
          4 St. Spannturm komplett, ø 50 mm x 900 mm
          4 St. Spannarm mit Spannelement ø 50 mm
          4 St. Kantenanschlag Höhe 200 mm in GG
          4 St. Auflagearm ø 50 mm
          2 St. Flanschspanner m. Spannturm ø 50 mm x 600 mm
          6 St. Prismenauflage ø 60 mm
          4 St. Prismenauflage ø 100 mm
          4 St. Anschlagwinkel 100 mm x 170 mm in GG
          2 St. Anschlagwinkel 170 mm x 170 mm in GG
          2 St. Universalwinkel 600 mm x 350 mm in Alu



          Set 2 - Rohrbau Edelstahl


          Set 2 - Rohrbau Edelstahl
          6 St. Spannarm mit Spannelement mit Bronzedruckstück
          6 St. Spannsäule komplett, ø 30 mm x 350 mm
          4 St. Spannturm komplett, ø 50 mm x 900 mm
          4 St. Spannarm mit Spannelement mit Bronzedruckstück
          4 St. Kantenanschlag in Alu Höhe 200 mm
          4 St. Auflagearm ø 50 mm mit Bronzeauflage
          2 St. Flanschspanner mit Spannturm ø 50 mm x 600 mm
          6 St. Prismenauflage Bronze ø 60 mm
          4 St. Prismenauflage Bronze ø 100 mm
          4 St. Anschlagwinkel in Alu 100 mm x 170 mm
          2 St. Anschlagwinkel in Alu 170 mm x 170 mm
          2 St. Universalwinkel in Alu 600 mm x 350 mm



          Set 3 - Gestell- und Gehäusebau Stahl

          Set 3 - Gestell- und Gehäusebau Stahl
          6 St. Spannarm mit Spannelement ø 30 mm
          6 St. Spannsäule komplett, ø 30 mm x 350 mm
          4 St. Flachspanner
          4 St. Spannarm mit Spannelement ø 50 mm
          4 St. Auflagearm ø 50 mm
          4 St. Spannturm komplett, ø 50 mm x 900 mm
          5 St. Kantenanschlag Höhe 70 mm in GG
          2 St. Doppelnutprofil 1.200 mm für Montage an Anschlagwinkel
          6 St. Flachanschlag (Stahl)
          4 St. Anschlagwinkel 100 mm x 170 mm in GG
          2 St. Anschlagwinkel 170 mm x 170 mm in GG
          2 St. Universalwinkel 600 mm x 350 mm in Alu
          1 St. Winkel, stufenlos verstellbar in GG
          2 St. Universalwinkel 350 mm x 350 mm



          Set 3 - Gestell- und Gehäusebau Edelstahl

          Set 3 - Gestell- und Gehäusebau Edelstahl
          6 St. Spannarm mit Spannelement mit Bronzedruckstück
          6 St. Spannsäule komplett, ø 30 mm x 350 mm
          4 St. Flachspanner mit Edelstahlscheibe
          4 St. Spannarm mit Spannelement mit Bronzedruckstück
          4 St. Auflagearm ø 50 mm mit Bronzeauflage
          4 St. Spannturm komplett, ø 50 mm x 900 mm
          5 St. Kantenanschlag in Alu Höhe 70 mm
          2 St. Doppelnutprofil 1.200 mm für Montage an Anschlagwinkel
          6 St. Flachanschlag in Alu
          4 St. Anschlagwinkel in Alu 100 mm x 170 mm
          2 St. Anschlagwinkel in Alu 170 mm x 170 mm
          2 St. Universalwinkel in Alu 600 mm x 350 mm
          1 St. Winkel, stufenlos verstellbar in Alu
          2 St. Universalwinkel 350 mm x 350 mm



          Set 4 - Universalbau Stahl

          Set 4 - Universalbau Stahl
          6 St. Spannarm m. Spannelement ø 30 mm
          6 St. Spannsäule komplett, ø 30 mm x 350 mm
          4 St. Flachspanner
          2 St. Spannarm m. Spannelement ø 50 mm
          2 St. Auflagearm ø 50 mm
          2 St. Spannturm komplett, ø 50 mm x 900 mm
          3 St. Kantenanschlag Höhe 70 mm in GG
          2 St. Kantenanschlag Höhe 200 mm in GG
          2 St. Doppelnutprofil 1.200 mm für Montage an Anschlagwinkel
          6 St. Flachanschlag (Stahl)
          4 St. Anschlagwinkel 100 mm x 170 mm in GG
          2 St. Anschlagwinkel 170 mm x 170 mm in GG
          2 St. Universalwinkel 600 mm x 350 mm in Alu
          1 St. Winkel, stufenlos verstellbar in GG
          4 St. Prismenauflage ø 60 mm



          Set 4 - Universalbau Edelstahl

          Set 4 - Universalbau Edelstahl
          6 St. Spannarm mit Spannelement mit Bronzedruckstück
          6 St. Spannsäule komplett, ø 30 mm x 350 mm
          4 St. Flachspanner mit Edelstahlscheibe
          2 St. Spannarm mit Spannelement mit Bronzedruckstück
          2 St. Auflagearm ø 50 mm mit Bronzeauflage
          2 St. Spannturm komplett, ø 50 mm x 900 mm
          3 St. Kantenanschlag in Alu Höhe 70 mm
          2 St. Kantenanschlag in Alu Höhe 200 mm
          2 St. Doppelnutprofil 1.200 mm für Montage an Anschlagwinkel
          6 St. Flachanschlag in Alu
          4 St. Anschlagwinkel in Alu 100 mm x 170 mm
          2 St. Anschlagwinkel in Alu 170 mm x 170 mm
          2 St. Universalwinkel in Alu 600 mm x 350 mm
          1 St. Winkel, stufenlos verstellbar in Alu
          4 St. Prismenauflage Bronze ø 60 mm

          Set 1 - Rahmenbau

          Set 1 - Rahmenbau Stahl
          4 St. Spannarm mit Spannelement ø 30 mm
          4 St. Spannsäule komplett, ø 30mm x 350 mm
          6 St. Flachspanner
          5 St. Kantenanschlag Höhe 70 mm in GG
          12 St. Flachanschlag (Stahl)
          6 St. Schnellspanner mit Flachanschlag
          4 St. Anschlagwinkel 100 mm x 170 mm in GG
          2 St. Universalwinkel 350 mm x 350 mm

          Set 1 - Rahmenbau

          Set 1 - Rahmenbau Edelstahl
          4 St. Spannarm mit Spannelement mit Bronzedruckstück
          4 St. Spannsäule komplett, ø 30 mm x 350 mm
          6 St. Flachspanner mit Edelstahlscheibe
          5 St. Kantenanschlag in Alu Höhe 70 mm
          12 St. Flachanschlag in Alu
          6 St. Schnellspanner mit Flachanschlag
          4 St. Anschlagwinkel in Alu 100 mm x 170 mm
          2 St. Universalwinkel 350 mm x 350 mm

          Set 2 - Rohrbau Stahl


          Set 2 - Rohrbau Stahl
          6 St. Spannarm mit Spannelement ø 30 mm
          6 St. Spannsäule komplett, ø 30 mm x 350 mm
          4 St. Spannturm komplett, ø 50 mm x 900 mm
          4 St. Spannarm mit Spannelement ø 50 mm
          4 St. Kantenanschlag Höhe 200 mm in GG
          4 St. Auflagearm ø 50 mm
          2 St. Flanschspanner m. Spannturm ø 50 mm x 600 mm
          6 St. Prismenauflage ø 60 mm
          4 St. Prismenauflage ø 100 mm
          4 St. Anschlagwinkel 100 mm x 170 mm in GG
          2 St. Anschlagwinkel 170 mm x 170 mm in GG
          2 St. Universalwinkel 600 mm x 350 mm in Alu

          Set 2 - Rohrbau Edelstahl


          Set 2 - Rohrbau Edelstahl
          6 St. Spannarm mit Spannelement mit Bronzedruckstück
          6 St. Spannsäule komplett, ø 30 mm x 350 mm
          4 St. Spannturm komplett, ø 50 mm x 900 mm
          4 St. Spannarm mit Spannelement mit Bronzedruckstück
          4 St. Kantenanschlag in Alu Höhe 200 mm
          4 St. Auflagearm ø 50 mm mit Bronzeauflage
          2 St. Flanschspanner mit Spannturm ø 50 mm x 600 mm
          6 St. Prismenauflage Bronze ø 60 mm
          4 St. Prismenauflage Bronze ø 100 mm
          4 St. Anschlagwinkel in Alu 100 mm x 170 mm
          2 St. Anschlagwinkel in Alu 170 mm x 170 mm
          2 St. Universalwinkel in Alu 600 mm x 350 mm

          Set 3 - Gestell- und Gehäusebau Stahl

          Set 3 - Gestell- und Gehäusebau Stahl
          6 St. Spannarm mit Spannelement ø 30 mm
          6 St. Spannsäule komplett, ø 30 mm x 350 mm
          4 St. Flachspanner
          4 St. Spannarm mit Spannelement ø 50 mm
          4 St. Auflagearm ø 50 mm
          4 St. Spannturm komplett, ø 50 mm x 900 mm
          5 St. Kantenanschlag Höhe 70 mm in GG
          2 St. Doppelnutprofil 1.200 mm für Montage an Anschlagwinkel
          6 St. Flachanschlag (Stahl)
          4 St. Anschlagwinkel 100 mm x 170 mm in GG
          2 St. Anschlagwinkel 170 mm x 170 mm in GG
          2 St. Universalwinkel 600 mm x 350 mm in Alu
          1 St. Winkel, stufenlos verstellbar in GG
          2 St. Universalwinkel 350 mm x 350 mm

          Set 3 - Gestell- und Gehäusebau Edelstahl

          Set 3 - Gestell- und Gehäusebau Edelstahl
          6 St. Spannarm mit Spannelement mit Bronzedruckstück
          6 St. Spannsäule komplett, ø 30 mm x 350 mm
          4 St. Flachspanner mit Edelstahlscheibe
          4 St. Spannarm mit Spannelement mit Bronzedruckstück
          4 St. Auflagearm ø 50 mm mit Bronzeauflage
          4 St. Spannturm komplett, ø 50 mm x 900 mm
          5 St. Kantenanschlag in Alu Höhe 70 mm
          2 St. Doppelnutprofil 1.200 mm für Montage an Anschlagwinkel
          6 St. Flachanschlag in Alu
          4 St. Anschlagwinkel in Alu 100 mm x 170 mm
          2 St. Anschlagwinkel in Alu 170 mm x 170 mm
          2 St. Universalwinkel in Alu 600 mm x 350 mm
          1 St. Winkel, stufenlos verstellbar in Alu
          2 St. Universalwinkel 350 mm x 350 mm

          Set 4 - Universalbau Stahl

          Set 4 - Universalbau Stahl
          6 St. Spannarm m. Spannelement ø 30 mm
          6 St. Spannsäule komplett, ø 30 mm x 350 mm
          4 St. Flachspanner
          2 St. Spannarm m. Spannelement ø 50 mm
          2 St. Auflagearm ø 50 mm
          2 St. Spannturm komplett, ø 50 mm x 900 mm
          3 St. Kantenanschlag Höhe 70 mm in GG
          2 St. Kantenanschlag Höhe 200 mm in GG
          2 St. Doppelnutprofil 1.200 mm für Montage an Anschlagwinkel
          6 St. Flachanschlag (Stahl)
          4 St. Anschlagwinkel 100 mm x 170 mm in GG
          2 St. Anschlagwinkel 170 mm x 170 mm in GG
          2 St. Universalwinkel 600 mm x 350 mm in Alu
          1 St. Winkel, stufenlos verstellbar in GG
          4 St. Prismenauflage ø 60 mm

          Set 4 - Universalbau Edelstahl

          Set 4 - Universalbau Edelstahl
          6 St. Spannarm mit Spannelement mit Bronzedruckstück
          6 St. Spannsäule komplett, ø 30 mm x 350 mm
          4 St. Flachspanner mit Edelstahlscheibe
          2 St. Spannarm mit Spannelement mit Bronzedruckstück
          2 St. Auflagearm ø 50 mm mit Bronzeauflage
          2 St. Spannturm komplett, ø 50 mm x 900 mm
          3 St. Kantenanschlag in Alu Höhe 70 mm
          2 St. Kantenanschlag in Alu Höhe 200 mm
          2 St. Doppelnutprofil 1.200 mm für Montage an Anschlagwinkel
          6 St. Flachanschlag in Alu
          4 St. Anschlagwinkel in Alu 100 mm x 170 mm
          2 St. Anschlagwinkel in Alu 170 mm x 170 mm
          2 St. Universalwinkel in Alu 600 mm x 350 mm
          1 St. Winkel, stufenlos verstellbar in Alu
          4 St. Prismenauflage Bronze ø 60 mm

          Schweißtisch